{"id":14,"date":"2019-03-20T04:34:46","date_gmt":"2019-03-20T01:04:46","guid":{"rendered":"http:\/\/hotairstenterlicheng.zarinblog.ir\/?p=14"},"modified":"2019-03-20T04:34:46","modified_gmt":"2019-03-20T01:04:46","slug":"hot-air-stenter-machinery-technology-limited","status":"publish","type":"post","link":"http:\/\/hotairstenterlicheng.zarinblog.ir\/2019\/03\/20\/hot-air-stenter-machinery-technology-limited\/","title":{"rendered":"Hot Air Stenter Machinery Technology Limited"},"content":{"rendered":"
With the help of good business ethics and international quality products like Hot Air Stenter Machine we have earned a respectful name in the domestic as well as in the global market.<\/p>\n
With a leading name in Hot Air Stenter Machine industry, we provide you with best quality products for all types of requirements.<\/p>\n
A machine or apparatus for stretching or stentering fabrics. The purpose of the stenter machine is to bringing the length and width to pre determine dimensions and also for heat setting and it is used for applying finishing chemicals and also shade variation is adjusted. The main function of the stenter is to stretch the fabric widthwise and to recover the uniform width.<\/p>\n
Function of Hot Air Stenter Machine :<\/p>\n
1. Heat setting is done by the stenter for lycra fabric , synthetic and blended fabric.<\/p>\n
2. Width of the fabric is controlled by the stenter.<\/p>\n
3. Finishing chemical apply on fabric by the stenter.<\/p>\n
4. Loop of the knit fabric is controlled.<\/p>\n
5. Moisture of the fabric is controlled by the stenter.<\/p>\n
6. Spirility controlled by the stenter.<\/p>\n
7. GSM of the fabric is controlled by stenter.<\/p>\n
8. Fabric is dried by the stentering processs<\/p>\n
9. Shrinkage property of the fabric is controlled.<\/p>\n
10. Curing treatment for resin, water repellent fabric is done by the stenter.<\/p>\n
Hot Air Stenter Notes:<\/p>\n
(1) Switch steam, power and heat according to safe operating procedures.<\/p>\n
(2) The temperature is increased by driving, and the production can only be carried out after the specified temperature is reached. Always observe changes in temperature during operation.<\/p>\n
(3) The width of the door and the weft density should be measured before the fabric is on the vehicle. If it is too different from the specified range, it cannot be put into production.<\/p>\n
(4) Adjust the tension of the cloth to make the fabric flat and wrinkle-free, not skewed, and sew the seam between the horse and the horse. The seam is straight, without wrinkles, and the width of the door should be aligned.<\/p>\n
(5) Pay attention to the cloth surface when laying out the cloth. If it is found that it is not clean, the width of the door is not satisfactory, the latitude, curling, wrinkles, etc., the disease should be removed in time.<\/p>\n
Application of Hot Air Stenter Machine :<\/p>\n
Hot Air Stenter Machine is used to stenter and heat set on woven fabric and knit fabric (such as cotton, polycotton, polyester, blending,mosquito net, etc.)<\/p>\n
Processes of Hot Air Stenter Machine:<\/p>\n
-drying,finishing,heatsetting<\/p>\n
-coating,laminating(special accessories needed)<\/p>\n
-dyeing((special accessories needed)<\/p>\n
LiCheng ZCMD768 Type Hot Air Stenter: This stenter suits for weight arrange 50-700g\/m2 cotton, wool, linen filament, silk etc. knitted or woven fabrics auxiliaries padding, stentering, drying and heat-setting.<\/p>\n
<\/a><\/p>\n